background image

- 9 -

EN

9I03

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (supplied) is detach-
able. Insert the stem of the antenna into the hole on
the upper-back portion of the TV/VCR.Connect the
VHF/UHF Rod Antenna or VHF/UHF Combination
Antenna to the ANT. terminal of the TV/VCR as
shown in the diagram. For the best reception, fully
extend the VHF/UHF Rod Antenna and make the
necessary adjustments. (Avoid touching the top sec-
tion when adjusting.)
NOTE:
Before plugging the Rod antenna into antenna termi-
nal, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
antenna terminal.

CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX

Use this connection if your cable system connects
directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TV/VCR remote to select channels.
2) Program one or more unscrambled channels for

Automatic Timer Recording.

NOTE: This unit will ONLY record and view the
same channel.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor
antenna.

NOTE:
The connection of an indoor antenna may not always
give acceptable TV reception.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-
ed to the grounding system of the building as close to the point of cable entry as practical.

CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE
BOX

If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the diagram.
By using this connection you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/VCR Remote Control. Unattended timer record-
ing is limited to one channel at a time.

Bent pin

Cable

Plug

(Needs to be straightened)

(Straight pin)

ANT.

IN

OUT

ANT.

Rod Antenna
(Supplied)

VHF/UHF Antenna
(Not supplied)

VHF/UHF
Combiner
(Not supplied)

Flat twin-lead cable

UHF Antenna
(Not supplied)

VHF Antenna
(Not supplied)

From 
Cable System

75-ohm Coaxial
Cable (Not supplied)

Satellite Box or
Cable Box
(Not supplied)

From Cable System or
Satellite Dish

or

or

or

or

 T5217 _VA  01.1.15  11:25 AM  Page 9

Summary of Contents for WF-13C2

































Reviews: