6.
Do not use other household bleach to clean the device in addition to the
above solution.
Cleaning the Main Unit
1.
Gently wipe the Main Unit with 75% medical alcohol and wipe off excess
water with
a
soft clean cloth;
2.
Clean the electrodes connecting the Main Unit and medicine bottle, in order
to make the device work normally.
a.
Do not wipe the Main Unit with other volatile liquid, such as
Benzene or Thinner.
b.
Do not rinse or immerse the Main Unit in any liquid.
Cleaning and Disinfecting of Mouthpiece and Masks
1.
Remove the mouthpiece or masks;
2.
Rinse the mouthpiece and Mask with pure water for 2 ~ 3 minutes
3.
Diy moisture with medical gauze.
4.
Wipe the mask and mouthpiece with 75% of medical alcohol at least 3
minutes to disinfect, and store to air dry.
A NOTE
：
Clean and disinfect all the parts.
Replace the aging/ broken mask or mouthpiece every one month or using
over 90 times. In. order to ensure the safety of your usage, please purchase the
parts from the regular manufacture
CHAPTER 4 STORAGE AND MAINTENANCE
1.
Storage Conditions:
⑴
Temperature; - 20 °C ~ 55 ;
Relative Humidity: < 80% R.H.
Air Pressure: 70.0 ~ 106.0 kPa;
Other requirements: No direct sunlight, Ventilation, No corrosive gas, No
heating device, or Open fire.
2.
Storage Instructions:
The producfs validtiy is advised as 3 years.
Summary of Contents for MY-130
