User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 24 of 46
Figure 15 - System Main Menu (Web Page)
From Figure 14, System Main Menu (Terminal Screen):
Option 1 – Change Command Prefix Symbol:
Enters a prefix symbol that works for you, if the current defined prefix has a conflict with your
application.
Option 2 – Select an Active Serial Console Port:
Selects an active serial port so that the Local Master Port becomes transparent to the active port.
Even if an active port is selected; you may or may not able to communicate with the user port.
You are only be able to operate the active serial port if the port is unreserved (“open”), or reserved
by you. However, if you logged in at Administration level, you are able to overwrite user level
privileges and operate the port.
Helpful info: control command “/sset n” executes the same function as the option 3.
Option 3 – Setup System:
Enters System Access Setup submenu.
Helpful info: control command “/sysshow” displays system access configuration settings.
Option 4 – Setup TCP/IP Network:
Enters TCP/IP Network Configuration submenu.
Helpful info: control command “/nwshow” displays network connectivity information..
