User’s Manual
Synaccess Networks, Inc.
www.synaccess-net.com
(760) 930 – 0473 Page 22 of 46
5 Using Configuration Menu
5.1 Starting Configuration Menu:
There are four ways to start the Configuration Menu:
1)
Local Master Port access method. Run a terminal program from a work station via serial
connections between a serial port from your work station and the Local Master Port of the
system.
2)
External Modem device access method. Run a terminal program from a remote work state
and establish the connection via a telephone line.
3)
Telnet access method. Your workstation and the system are connected to LAN.
4)
Web access method. Your workstation and the system are connected to LAN.
If you have already logged on to the system, enter the command “setup” and you will see “Main
Menu” table as shown in Figure 15. Without login to the system, if you enter command “setup” you
will see the following screen:
Figure 14 - Menu Configuration – Login Menu
Menu selection 1:
When you enter the system as an anonymous user, you can start operate serial console ports or
power outlets as far as they are not reserved by other users. However, you can only view system
configuration parameters and are not able to make system configuration changes.
Menu selection 2:
If you already have accounts established and want to start configuring the system or to change
serial console port and power outlet operation status, choose this menu option.
************************************************************
* *
* *
* Login Menu *
* *
* *
************************************************************
>
> 1) Anonymous (Visitor) login
2) Login
3) Help
4) Quit
>Enter your selection:
