RATE
The rate of the filter modulation, relative to the cur-
rent tempo (see the LFO section for a description of
the available modes).
MOD
Sets the amount of filter modulation. When set to
zero, the phaser acts as a static filter with the fre-
quency determined by the FREQ knob.
LR OFFSET
Offsets the modulation between left and right chan-
nels. This makes the phaser sound stereo, even when
its input signal is monophonic. Use this parameter to
create wide stereo effects.
DRY/WET
Blends between the dry and processed signal.
3.8.5 Chorus/Flanger
Summing a signal with a time-delayed copy of itself
creates a chorus effect, if the time delay is continu-
ously varied as well.
When choosing small delay times and applying feed-
back, the classic flanger effect is obtained.
DELAY
Sets the base delay time in milliseconds.
RATE
Sets the modulation rate in Hz.
DEPTH
Sets the modulation depth from 0% to 100%.
FEEDBACK
Feeds the delay output back to the effect input, creat-
ing resonances. Both positive and negative feedback
is possible in Antidote’s chorus.
LR OFFSET
Offsets the modulation phase between the left and
right channels. This makes the chorus sound stereo,
even when the input signal is monophonic. Use this
parameter to create spatial effects.
DRY/WET
Blends between the dry and processed signal.
21
Antidote User’s Manual
Summary of Contents for Antidot
Page 1: ...User s Manual...