Safety and ESD Precautions
Before first use, refer to this manual.
Before first use, make sure that all cables are connected properly
Please ensure proper working conditions, according to the device specifications
e.g. Supply voltage, ambient temperature, maximum power consumption
requirements.
Ensure all wiring and connector terminals are securely fastened so as to avoid short
circuits or other such damage.
Before making any modifications to wiring connections or PCB settings, turn off the
power supply.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense.
Caution -
Component damage. Circuit boards contain electronic components that
are extremely sensitive to static electricity. Ordinary amounts of static electricity
from clothing or the work environment can destroy the components located on
these devices.
Do not touch the components without antistatic precautions, especially along the
connector edges.
