Outgoing Calls
31
Synapse SB67035 Deskset User’s Guide
Back to Contents
Making an Intercom Call
To make an internal (extension-to-extension) call, you must press the
INTERCOM
key as
shown in
Figure 10 on page 18
. By default, key 5 is the Intercom key, but your system
administrator can configure additional Intercom keys to give you more Intercom lines.
By default, your Deskset uses an outside line any time you go off hook by lifting the
handset, pressing
SPEAKER
, or by some other method. However, your system
administrator can configure your Deskset to use the Intercom line any time you go off
hook.
To make an intercom call:
1. With the Deskset in Idle mode, go off hook by lifting the handset, pressing
SPEAKER
,
or by some other method.
2. If necessary, press the
INTERCOM
key, and then dial the extension number.
Instead of dialing after pressing the
INTERCOM
key, you can press
,
highlight the desired extension number, and then press
or
SELECT
to dial
the number.
3. When your Intercom call is answered, the active call screen appears.
Intercom Calls apply to Line Appearance mode only.
12:30PM Thu Feb 25 2010
ExtList
Page
Quick
Dial
Line 2
Line 3
Line 4
Line 1
ExtList
Call
12:30PM Thu Feb 25 2010
Graham Bell
219
0:20
HoldList
Conf
Quick
Dial
Line 2
Line 3
Line 4
Line 1
DND
Page
