24port Gigabit PoE Switch
w/LED Display & 2G SFP
User Manual
FCC Warning
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates and radiates radio frequency energy and, if not
installed and used in accordance with the user’s manual, it
may cause interference in which case users will be required
to correct interference at their own expenses.
CE Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.
Introduction
This switch provides 24 10/100/1000M ports. It was designed
for easy installation and high performance in an environment
where traffic is on the network and the number of users
increases continuously.
It consists of 24 PSE/PoE ports. That can solve the limitation
of the power outlet location and offer the system designer a
flexible solution to locate the network device everywhere
.
The compact rigid rackmount size was specifically designed
for medium to medium workgroups. It can be installed where
space is limited; moreover, it provides smooth network
migration and easy upgrade to network capacity.
Package Contents
Before you start to install this switch, please verify your package
that contains the following items:
One Gigabit
PoE Switch
One Power Cord
One User’s Manual
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.
Product Features
24 Port PSE/ PoE function, compliant with IEEE-802.3af/at
Supporting the power up to 30Watt for each PSE/PoE port
Providing 24 10/100/1000Mbps switching ports
Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX
Comply with IEEE 802.3x Flow control; back pressure for
Half-duplex and for Full-duplex mode
All ports support Auto-MDIX function
Being dedicated 200Mbps Full-duplex bandwidth to the each port
Broadcast storm control and supporting store & forward operation
Non-blocking & Non-head-of-line blocking full-wire speed
forwarding
Auto-learning networking configurations
Built-in 4K MAC learning table, 2.75M bits buffer memory
Filtering/Forwarding
Rate:
1000Mbps/1,488,000pps;
100Mbps/148,800pps; 10Mbps/14,880pps
Supports packet length 1536 bytes
Status LEDs: System Power, Link/Activity, and PoE/PSE on line
LEDs Display: total Power, balance power, power consume per
port
Network Transmission Media: 10Base-T Cat. 3, 4, 5 UTP/STP;
100Base-TX Cat. 5, 5e UTP/STP; 1000BASE-T Cat. 5e, 6
UTP/STP
Internal Power supply: AC input (90~260V/AC, 50~60Hz) UL
Safety
Operating Temperature: 0
℃
~ 40
℃
Storing Temperature: -20
℃
~ 90
℃
Humidity: 10% ~90% RH (Non-condensing)
Dimension (L x W x H): 440mmX220mmx44
mm (19”, 1U high)
Power supply : 250Watt
Weight: 4.2 Kg
Safety & EMI Certificates: CE & FCC
Smart plug & play
