Installation
11
© 2015 Syncronorm GmbH
2.4.4
Input and Output Configuration
2.4.4.1
Setup Network Connection
To be able to connect to your V:Server you need to setup the IP-Addresses one time. To get access to
the Settings of the V:Server you need to Login first:
1. Press on the "Login" Button and use as password "depence" in lower case.
2. Now the "Settings" button will be enabled
3. In the tab "Input and Output Configuration" select "Network Settings"
4. Assign a valid IP address for Shownet and if you also want to use Comnet for running a TeamViewer
application in background, you can also setup an additional IP address for Comnet.
Note that it is always recommend to use static IP addresses instead of using DHCP.
Now, V:PAD should be able to connect to your V:Server as soon as they are in the same Network.
