background image

Installation

15

© 2015 Syncronorm GmbH

3

Maintenance and cleaning

The device requires regular maintenance. 
Carry out maintenance in accordance with the maintenance schedule: 

If necessary, update your software version 

Important information! 
Maintenance work must be carried out only by qualified expert personnel. 

4

Guarantee

For this SYNCRONORM unit purchased by you, SYNCRONORM GmbH assumes a 

24 month

manufacturer's guarantee in accordance with the guarantee conditions laid down in the
following. 

The guarantee period starts with the first purchase from an SYNCRONORM specialist dealer.

In other words, in the event of a resale, the guarantee period will not start again. If services are provided
under the terms of this guarantee, this does not lead to extension or renewal of the guarantee period.
Your legal rights as a purchaser, especially those ensuing from the warranty, persist. They are not
restricted by this guarantee. 

Syncronorm warranties are limited to our product only and do not extend to any
direct, indirect or subsequential loss under any circumstances.

Guarantee conditions 

SYNCRONORM GmbH guarantees impeccable, purpose-related properties and workmanship, expert
assembly and proper functionality. Subject to our discretion, the guarantee refers to free-of-charge repair
or free-of-charge supply of spare parts or of a replacement unit respectively. Should the unit type
concerned no longer be manufactured, we reserve the right, at our discretion, to supply a replacement
unit from our range that is closest to the type subject to complaint. Claims, the origin of which can be
traced back to installation and operating faults as well as lack of care, e.g. the use of unsuitable cleaning
materials or negligent maintenance, use other than that intended, damage due to accidents, falls,
impact, effect of frost, cutting plugs, shortening cables, calcium deposits or improper attempts to repair
the unit, are not covered by our guarantee. We hereby refer to the proper use as specified in the
instructions of use that form an integral part of the guarantee. Wear parts such as bulbs etc. are
exempted from the guarantee. 
The refund of costs for removal and installation, checks, claims for lost profit and damages are exempted
from the guarantee together with further reaching claims for damages and loss of whatever nature caused
by the unit or its use. 

The guarantee is only valid in the country in which the unit was purchased from an SYNCRONORM
dealer. This guarantee is governed by German law under the exclusion of the agreement of the United
Nations covering contracts governing the international sale of goods (CISG) regulations. 
Guarantee claims can only be brought forward by presenting the sales receipt to us, SYNCRONORM
GmbH, Graf Gottfried Strasse 122, 59755 Arnsberg, Germany by returning to us the unit or part of the
unit subject to complaint, freight free, at your own risk, accompanied by a copy of the original purchase
receipt from the SYNCRONORM specialist dealer, this guarantee document and written information of
the fault encountered. 

Summary of Contents for V:Server U16


















Reviews: