background image

EZ VMS Lite

 

asked to re-enter the password. If you enter an incorrect password 3 times successively,
you will be asked to hang-up and the call is disconnected.

Once you are logged into your mailbox, the  

EZ VMS Lite

  plays the number of new

(unread) and saved (already read) messages that you have in your mailbox. Then 

EZ VMS

Lite

 prompts you with:

Press 1 to Listen to New Messages (2.2.1) 

(If there is no New Message, this prompt is not played) 

Press 2 to Listen to Saved Messages (2.2.2)

(If there is no Saved Message, this prompt is not played) 

Press 4 for Mailbox Options. (2.2.4)

Press 5 to Send a Message. (2.2.5)

Press 6 for Reminder Call Options. (2.2.6)

Press 7 to Undelete a Message. (2.2.7)

2.2.1

Listen to New Messages

After you press 1 to listen to new message(s), 

EZ VMS Lite

 plays the first new message

along with date and time stamp and prompts you with the following options:

Press 1 to Save the Message

Press 2 to Play the Next Message

Press 3 to Delete the message

Press 4 to Replay the Current Message

Press 5 to Forward the Message

Press 6 to Play Date & Time Stamp

Save Message:

  You may save the message by pressing 1. Once you listen to a new

message, it is regarded as a saved message when you skip to the next message, even
though you did not press 1 to save the message.

Play   Next   Message:

  This  option   plays  the   next  message   if  there  is  one  more   new

message. After you press 2, the next new message is played and the same options are
available as before. If there are no more new messages, the unit prompts with “This is
the last message”.

Delete the Message:

 This option deletes the current message from the list of messages

for that mailbox. You may restore this message by pressing 7 in the previous menu (using
the option “Undelete a Message” as explained in section 2.2.7)

Replay the Current Message:

 

EZ VMS Lite

 repeats the current message along with the

date & time stamp. 

Forward the message:

 When you press 5 for the option “Forward the Message”, 

EZ VMS

Lite

 responds with:

Press 1 to Send to a Mailbox.

Press 2 to Send to a Distribution List

31

Summary of Contents for EZ VMS Lite















































































Reviews:

Related manuals for EZ VMS Lite