background image

EZ VMS Lite

 

If you press 1 to send the current message to a mailbox, you have to enter an existing
mailbox   number   so   that  

EZ   VMS   Lite

  may   forward   the   message   to   that   particular

mailbox.

If you select 2 to forward the current message to a distribution list, 

EZ VMS Lite

 gives

you the following options:

Press 1 to Select All

Press 2 to Select Programmed List.

If you select the first option, the current message is forwarded to all existing mailboxes
in 

EZ VMS Lite

. If you select second option, current message is forwarded to a particular

distribution list.

Play Date & Time Stamp: ‘

Date & Time Stamp’ indicates the date and time of recording

the message. If you select this option, 

EZ VMS Lite

 plays the date & time stamp of that

particular message. For example: if somebody leaves a message on 30th July, at 10 A.M.
to a mailbox, 

EZ VMS Lite

 plays the date & time stamp as: <30th July 10 A.M.>. The year

is regarded as current year.

The 6 options under “Listen to New Messages” are played for each New Message.

2.2.2

Listen to Saved Messages

After you press 2 to listen to saved message(s), 

EZ VMS Lite

 plays the first saved message

along with date and time stamp and prompts you with following options:

Press 2 to Play Next Message

Press 3 to Delete the message

Press 4 to Replay the Current Message

Press 5 to Forward the Message

Press 6 to Play Date & Time Stamp

This  is  similar   to   the   “Listen  to  new   messages”  option   except  that  only   the  saved
messages are played back. 

2.2.4

Mailbox Options

After you press 4 for ‘Mailbox Options’, 

EZ VMS Lite

 prompts as follows:

Press 1 to Record and Set Mailbox Greeting Options.

Press 2 to Set Do-Not-Disturb Option.

Press 3 For Follow Me Option. (This prompt is played only when the ‘Usage
Transfer Type’ is set to Fully Supervised mode).

Press 4 to Change Your Password.

Press 5 for External Notification Option. (This prompt is played only when
Admin. enables External Notification feature in ‘Global Mailbox Settings’ and
‘External Notification for a Particular Mailbox’).

32

Summary of Contents for EZ VMS Lite















































































Reviews: