EZ VMS Lite
calls the
EZ VMS Lite
and sends the appropriate string to inform the unit that this is a call
that was transferred earlier and is now being transferred back to it because the called
extension was busy or there was no answer from it. The unit plays the appropriate
message back to the original caller after decoding the string sent by the PBX.
Some PBX’s use two different strings for each type i.e. two Busy strings and two no-
answer strings. In such cases, the
EZ VMS Lite
provides a facility to enter an Alternate
Busy / No answer string also.
Maximum number of digits allowed = 16.
Default = None
Busy String:
E.g.: *52E
Alternate Busy String:
E.g.: *53E
No-Answer String:
E.g.: *54E
Alternate No-Answer String:
E.g.: *55E
Hang-up String:
This is a string that may be sent by the PBX at any time during the call
that is already in progress, to signal the
EZ VMS Lite
that the caller has hung up and
hence this call may be terminated.
Example: ###.
Transfer & Retrieve Strings:
Allowed alphabets are ‘e’, ‘p’, ‘h’, ‘a’, ‘b’, ‘c’, ‘d’ and their capitals.
52
Summary of Contents for EZ VMS Lite
