EZ VMS Lite
In the Semi supervised mode of transfer, the unit monitors the call after transferring and
if the called extension is busy or an invalid extension, it retrieves the call and informs the
caller accordingly. However, if it gets a ring-back signal from the called extension, the
unit hangs up and thus connects the caller to the called extension.
In the fully supervised mode, the unit monitors the call till the called party answers the
call or if there is no answer, it retrieves the call and informs the caller accordingly.
Default : Blind mode of call transfer.
Rings to Pickup per Port :
The
EZ VMS Lite
can handle four incoming calls at a time on its
four ports. However, each port may be programmed separately for the number of rings
to wait before answering the call by going off-hook.
Valid range is from 0 to 9. By default, this value is 0 for each port.
PMS Settings :
The serial port settings for the PMS port and the strings for the various PMS functions
must be set properly here to have the
EZ VMS Lite
interface correctly with a Hotel’s PMS
system.
The baud rate, number of data bits, the stop bits and parity may be set as desired by
selecting the correct option from the drop down boxes giving all the available options.
Ack/Nak may be enabled if the PMS supports it. Click on the check box to enable this
function.
54
Summary of Contents for EZ VMS Lite
