The equipment comes with the standard parts shown on the package contents. Check and make sure they are included and in good
condition. If anything is missing, or damage, contact the supplier immediately.
Unpacking
Package contents
( 1 ) Vertical MTS / MT PDU x 1
-
VMS
mounting screw, set of 2 or 3
-
VMB
mounting bracket set
OUT
IN
RESET
ON
DIP
1
8
7
6
5
4
3
2
CURRENT
(
A
)
225
2 - 3 sets
+
M4
M4 x 2
M6 x 2
M6 nut x 2
PEG
OUT
IN
RESET
ON
DIP
1
8
7
6
5
4
3
2
CURRENT
(
A
)
225
M4
M4
M6
M6
M6 nut
M6 nut
Bracket x 2
( 2 ) Rackmount MTS / MT PDU x 1
OR
Power ON
■
Connect the PDU into an appropriately rated receptacle
■
When the PDU is power on, the LED display will light up. That means all outlets are activated
■
Keep the equipments in the power off position until it is plugged into the PDU
Don’t exceed the outlet, branch or phase limitations
All electrical power and power control wiring must be installed by a qualified electrician and comply with local
and national regulations.
Summary of Contents for InfraPower IPM-01
