Both of these delays can be removed from the 1PPS by using the Motorola binary
@@Az command as detailed in the M12M User’s Guide.
ANTENNA INSTALLATION
The GSynQ is designed for simple installation.
Mounts include Right Angle pipe clamp, adaptors for threaded or smooth pipe and
gasket and nut for through-roof vehicle mount.
When using Synergy’s R/A mounting bracket P/N10001725, the mast may be made
from 1” schedule 40 pipe, or any tubing or conduit with an outside diameter of 1.5” or
less.
In order to mount the antenna on the end of a 3/4” NPT threaded pipe (or 1-14
Marine Thread) the user should order a Synergy P/N 10001511-1 mounting adapter.
This will provide a step-down between the 28mm thread on the antenna and the pipe
thread.
If the antenna is being mounted on a smooth 1” OD pipe or conduit the user should
order the Synergy P/N 10001511-2 adapter which allows the conduit to slide into the
adapter where it is secured by a ¼ inch diameter stainless steel set screw.
