1. Due to the nature of FFF 3D printing some
warping may have occured on the face on which the
part was printed. This warping is purely cosmetic
and have been filled in by applying additional glue
and smoothing it out. This will ensure the gap due to
warping is sealed.
Before we
get
started:
Safety Notices:
1. Take care when handling the 3D printed parts as some contain very sharp
edges
Please be aware that
:
2. Some part may differ slightly to the pictures shown in this kit,
don’t
be alarmed,
you have the latest part. This manual was shot with a prototype model which
received some minor udgrades
2
For this kit you will need the 3D printed parts and non 3D printed parts which come
included.
The list of electronics that you will ned include: 50mm EDF (without a lip), ESC, LiPo
Battery, Receiver and Transmitter.
You will also need the following common household tools: scissors, tape (Duct Tape or
Masking Tape.
What you will need
