5
6
EN
EN
EN
EN
1
2
3
4
5
High
Level
Cartridge
Epilator/Shaver
Medium
Low
Error
device components (Figure 1):
1.
base unit.
2.
cradle.
3.
control panel with:
power button
Level
energy setting buttons
indicators for the percentage (%) of pulses remaining
accessory activation button
4.
applicator (hand piece with cord).
5.
cartridge with light output window and RF silver contact bars
applicator components (Figure 2):
6.
light output window: the light energy flashes out through the treatment window.
7.
RF silver contact bars: the two RF bars must be in complete contact with the
skin for the light pulses to flash.
8.
cartridge: the cartridge comes attached to the applicator and is
preloaded with
pulses. You will need to replace the cartridge when the
Empty indicator light on the base unit is red.
9.
activation button: press on this button to turn on the applicator.
You will hear the fan turn on, and the activation indicator will light up.
10.
cooling outlet: hot air is forced out of the cooling outlet in order to keep
the applicator cool while in use.
11.
accessory protective cap.*
*If you don’t have a replacement cartridge – make sure you place the
protective cap instead of the used cartridge. This is in order to protect the inner
parts of applicator.
Applicator Bottom View
Applicator Top View
8
7
10
9
6
11
Figure 2: Top and bottom view of applicator
system
system
Figure 1: me system
me with cartridge and epilator
