-----------------------------------------------------------------------------------------------------------------------------------------
7
/
26
To guarantee a safe operation, the following safety warning need to be read before operation.
1.
Except our company’s technicians, no one is allowed to open the machine, or do any Internal
overhaul, power/ head internal adjust is also not allowed.
2.
Please check and confirm the voltage is the same as your local one. ( 220V/AC or 110V/AC)
3.
Only the power is shut down, machine can be maintain. Maintaining while machine is on
power can damage the operators/ patients and machine itself.
4.
Keep the treatment area, which will be connected with the treatment head, clean and dry.
II. Electrical and mechanical safety
Keeping all panels and covers are closed, or may be dangerous.
This system can create the dangerous high voltage, even after disconnecting the power cord,
some parts may still stored there power. So in addition to our designated personnel, other
personnel forbidden open the instrument.
maintenance of equipment, people should not turn on the power, open the cover or put the
device on unattended state.
If move the machine incorrectly may cause personal injury. The machine is well balanced and
is movable, but only move slowly and carefully.
the machine via three-wire power cord grounding the earth, good ground is essential for safe
operation.
[Fire prevention]
1.
Preoperative skin treatment implementation must not use alcohol or acetone flammable to
clean skin. if necessary, use soap and water.
2.
If you use alcohol to clean the treatment probe or any part of it, must keep dry before
starting.
[System Safety devices]
1.
The system is equipped with several safety devices; all operating room personnel must be
familiar with all of their location and usage.
2.
The button switch: it is used to turn on and turn off the power.
3.
Power indicator light: blue, boot light, indicating that the system is on.
4.
The emergency switch: This red mushroom-shaped button can shut down the whole machine
urgently. When it is pressed, regardless of what state the system is in, the power supply will
be cut off immediately. loosen Emergency switch clockwise, otherwise device remains in the
off state.
[Device Self-checking]
After booting, the circuit go into self-checking instantly. In this case, the operator should allow the
