12
Pedal Input 3: EXP
(use this for a 2
nd
Expression pedal if desired)
Calibrating Synapse to your Expression pedal when connected
to Input 3
- Position the blue trimmer on the bottom of the Synapse under Input 3
"Hat/EXP" to fully counterclockwise
- Enter Raw Mode and move your expression pedal from fully open (heel
down) to fully closed (toe down) and notice the number changing in the
indicator box next to "Input 3" in the program
- Turn the trimmer slowly clockwise as you rock the pedal back and forth
from fully open to fully closed until you find the trimmer position where you
are getting the largest range of numbers in the indicator box as the pedal
swings its full range
- Exit Raw Mode
- Position your pedal fully open (heel down) and click the "Cal Open" button
at the bottom of the Input 3: EXP column
- Position your pedal fully closed (toe down) and click the "Cal Closed"
button at the bottom of the Input 3: EXP column
- Look at the MIDI Meter (in the upper right of the program) to see your
MIDI controller output successfully cover the full MIDI range from 0 to 127
as you rock your pedal from open to closed
- Finish by configuring the other parameters in the Input 3: EXP column to
your liking
Pedal Input 4: EXP
Calibrating Synapse to your Expression pedal
- Position the blue trimmer on the bottom of the Synapse under Input 4
"EXP" to fully counterclockwise
