9
www.synexis.com
+1 844-352-7680
Installation
Identify a suitable location for the unit
downstream from both the ‘A’ coil in the
supply plenum and from the air filter.
Use provided duct cutout template.
Apply the template to the section of
duct that is desired for the installation.
Remove the ‘Cut Out Area’ of the template.
Drill the 1/8 inch diameter holes where
indicated on the template. Trace the ‘Cut
Out Area’ with a marker and remove the
template.
Ensure that the bulb is centered with
respect to the sail frame.
Utilizing a step drill bit, drill a hole within
the area of the duct to be removed.
Remove the remaining section of sheet
metal from the ‘Cut Out Area’ using a
pair of tin snips or a jig saw.
AIRFLOW
