background image

2

www.synexis.com

+1 844-352-7680

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS DEVICE READ ALL INSTRUCTIONS AND CAUTIONARY STATEMENTS IN 

THIS MANUAL AND ON THE DEVICE.

The Sentry is an electrical device. Please read the safety instructions and considerations before 

use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The 

Limited Warranty applies only if the unit is used in accordance with these instructions. 

 

Use the grounded three-prong power cable provided with your device. The plug fits  

 

securely into a grounded three-prong outlet. Do not alter the plug in any way.

 

WARNING: Electrical shock can cause personal injury or death. 

  

WARNING: Skin or eye damage may result from directly viewing the light 

produced by the lamp in this apparatus. Always disconnect power before 

relamping or servicing. Replace Lamp with Lamp Model No., M4-CX-08, 

Manufactured by LCD Lighting Inc. 

  

WARNING: Do not allow the device to become clogged with dust or other debris. 

Check it regularly and replace the catalytic Sail or filter if they become clogged.

  

WARNING: To reduce the risk of fire or electric shock, do not use this product 

with any solid-state speed control device.

When using an electrical device, basic precautions should always be observed, including  

the following:

 

WARNING

These warnings apply to the Synexis

®

 device and, where applicable, to all tools and accessories

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR SERIOUS INJURY:

  1.   Keep combustible materials, like bedding, clothing, curtains, furniture and paper at least 

three feet away from the device when it is plugged in.

  2.   Use only as described in this Synexis Operating Manual. Do not perform any maintenance 

other than what is shown in this manual. Any other use, not specifically recommended by 

the manufacturer may result in fire, electric shock or injury.

  3.   Make sure device is assembled by following manufacturer’s instructions completely. Do 

not dismantle the device. 

Summary of Contents for Sentry

















Reviews: