Synexis Sentry Owner'S Manual Download

Page: 4 / 16

20. If the Sentry device is not working as it should, has been dropped, struck, damaged,

left outdoors, or dropped into water, do not use and contact your Synexis Account

Representative.

21. Contact Synexis when service or repair is required. Do not disassemble the Sentry

device, as incorrect re-assembly may result in electric shock or fire.

22. Do not use any cleaning agents or lubricants on the Sentry device. Unplug power cord

from outlet before performing any type of maintenance.

23. To avoid a tripping hazard, secure power cord when not in use.
24. Do not use Sentry device near furnaces, fireplaces, stoves or other high-temperature

heat sources.

25. Do not spray or apply perfumes directly on or near the filter. Keep essential oils and

chemicals away from the Sentry device.

READ AND SAVE THESE INSTRUCTIONS

Summary of Contents for Sentry

















Search results

Summary of Contents for Sentry

Reviews:

Related manuals for Sentry

Brands by name

Popular brands

Synexis Sentry, Owner'S Manual

Search results

Summary of Contents for Sentry

Reviews:

Related manuals for Sentry

Brands by name

Popular brands