9
Chapter 2: Hardware Setup
3
Push the Power button to turn on your RackStation.
Your RackStation is now online and detectable from a network computer.
Add a RAM Module on RackStation
Synology RAM module 2GB is designed for RackStation memory expansion, and is optional for your choice.
Follow the steps below to install, check, or remove your RAM module.
To install the RAM module:
1
Shut down your RackStation. Disconnect all cables connected to your RackStation to prevent any possible
damages.
2
Remove the 2 screws on the back of RackStation, and then pull the top cover.
Important:
When you pull out the cover, you expose sensitive internal components. Avoid touching anything other
than the memory assembly when you remove or add memory.