Operating Instructions for SM-340H RFID Locker Lock
IDD: +1-604-731-0898
|
info@synometrix.com
|
synometrix.com
Once the lock is properly installed, follow the instructions below to set up the Owner
Card, Master Card and Guest Tags.
1. Owner Card (Maximum 1pc)
a)
Program Owner Card:
After initialization, scan the first RFID card near the
inductive area. The green light comes on, music sounds and the programmed card is
now the owner card.
b)
Change Owner Card:
Operate Step 1 initialization and then scan the RFID card
near the inductive area. The green light comes on, music sounds and the owner card
is changed.
NOTE:
Only one owner card is allowed for each lock, but the owner card can be
programmed across many different locks. The owner card is used to program or delete
the master cards and cannot be used to lock or unlock. Keep the owner card in a safe
place and do not lose it.
2. Master Cards (Maximum 5 pcs)
Master cards are used to program or delete a user card and can also be used to lock or
unlock the lock. When a lock is unlocked using a master card all user cards are deleted.
For convenient management the same 2 or 3 master cards can be used as the master
cards for all locks at one site. Alternatively, master cards can be set up for different zones
in your facility or assigned to handle members and guests separately.
a)
Program Master Card:
Scan the owner card near the inductive area. The music
sounds and the red and green lights will flash for 6 seconds. While the lights are