laser safety
9
Synrad
Firestar i401
operator’s manual
Agency compliance
When integrating SYNRAD’s Firestar i401 OEM lasers, the Buyer and/or integrator of the end system is
responsible for meeting all applicable Standards to obtain the CE mark. To aid this compliance process,
SYNRAD’s testing program has demonstrated that Firestar i401 lasers comply with the relevant require-
ments of 2004/108/EC, the Electromagnetic Compatibility Directive, as summarized in Table 2 below.
Table 2
European Union Directives
Applicable Standards / Norms
2004/108/EC
Electromagnetic Compatibility Directive
2006/95/EC
Low Voltage Directive
2002/95/EC
RoHS Directive (amended 2005/618/EC)
EN 61010-1:2001
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements
EN 61000-6-4:2007
Radiated Emissions Group 1, Class A
EN 61000-6-4:2007
Conducted Emissions Group 1, Class A
EN 61000-6-2:2005
Electrostatic Discharge Immunity
EN 61000-6-2:2005
RF Electromagnetic Field Immunity
EN 61000-6-2:2005
Electrical Fast Transient/Burst Immunity
EN 61000-6-2:2005
Conducted RF Disturbances Immunity
After a laser or laser processing system has met the requirements of all applicable EU Directives, the prod-
uct can bear the official compliance mark of the European Union as shown in Figure 2 and a Declaration
of Conformity is provided for the compliant component.
Figure 2
European compliance mark
