Synway Information Engineering Co., Ltd
Figure 3-32 Add New CalleeIDs in Whitelist Interface
The table below explains the items shown in above figures.
Item
Description
Group
The corresponding Group ID for CallerIDs/CalleeIDs in the whitelist. The value
range is 0~7.
No. in Group
The corresponding No. for different CallerIDs/CalleeIDs in a same group.
CallerID
CallerID in the whitelist, which must be filled in with numbers or “*” (indicating any
string) and can not be left empty.
Rule explanation:
Character Description
“*” indicating
any
string
“0”~”9” Digits
0~9.
“x”
A random number. A string of ‘x’s represents several random
numbers. For example, ‘xxx’ denotes 3 random numbers.
“[ ]”
‘[ ]’ is used to define the range for a number. Values within it only
can be digits ‘0~9’, punctuations ‘
-
’ and ‘
,
’. For example,
[1-3,6,8] indicates any one of the numbers 1, 2, 3, 6, 8.
“-”
’-’ is used only in ‘[ ]’ between two numbers to indicates any
number between these two numbers.
“,”
’,’ is used to separate numbers or number ranges, representing
alternatives.
CalleeID
CalleeID in the whitelist, which must be filled in with numbers or “*” (indicating any
string) and can not be left empty. The rules are the same as that of CallerID.
After configuration, click
Save
to save the above settings into the gateway or click
Close
to cancel
the settings.
Click
Modify
in Figure 3-30 to modify the CallerID or CalleeID whitelist. See Figure 3-33, Figure
3-34 for CallerIDs/CalleeIDs on the Whitelist Modification interface. The configuration items on
this interface are the same as those on the
Add New CallerIDs/CalleeIDs in Whitelist
interface.
The item
Group No.
cannot be modified.
Figure 3-33 Modify CallerIDs in Whitelist
SMG SBO Series Gateway User Manual (Version 1.6.3)
Page 36
