Synway Information Engineering Co., Ltd
Figure 3-34 Modify CalleeIDs in Whitelist
To delete a CallerIDs/CalleeIDs in the whitelist, check the checkbox before the corresponding
index in Figure 3-30 and click the ‘
Delete
’ button. To clear all CallerIDs/CalleeIDs in the whitelist
at a time, click the
Clear All
button in Figure 3-30.
Note:
If a CallerID or CalleeID set in the whitelist is the same as one in the blacklist, it will go
invalid. That is, the blacklist has a higher priority than the whitelist. The total amount of numbers in
both whitelist and blacklist cannot exceed 5000.
3.5.2 Blacklist
Figure 3-35 Blacklist Setting Interface
The Blacklist Setting interface is almost the same as the Whitelist Setting interface; only the
whitelist changes to the blacklist. See Figure 3-35. The configuration items on this interface are
the same as those on the Whitelist Setting interface (Figure 3-31, Figure 3-32).
Note:
The lacklist has a higher priority than the whitelist. That is, if the same number exists in both
blacklist and whitelist, the number in blacklist has priority.
SMG SBO Series Gateway User Manual (Version 1.6.3)
Page 37
