background image

37 

Notes 

 
Important : Safety Notices and Warnings 

Precautions of use for the SYS’Alti 

Never leave your SYS’Alti unattended 
Take care of your equipment by cleaning with a soft cloth regularly. Do 
not open the product, the screws are tight with a certain degree which 
guarantees the seal of the unit. This action would cancel your guarantee. 
If water were introduced by inadvertency into your SYS, open the USB 
cache to air it and wait until it is dry before lighting it. Do not expose your 
device to too high or too low temperatures, which risk damaging it for 
good. Avoid leaving it in full sun as an ornement, or putting it in the 
freezer! The soaring in the Antarctic is not guaranteed!! 
Ensure that the product is well in position before taking off. Syride cannot 
be held responsible for the loss of the product during the flight (takeoff 
included). 
We give great importance to constantly  improve the treatment results of 
sessions. We can provide an estimate of the indicators. If your results are 
not consistent with reality, please let us know so we can improve our data 
processing. 

 
Battery

 

This product uses a lithium-ion battery. Do not expose to temperatures 
above 50 ° C (120 ° F). The SYS tells the user if it detects a temperature 
above 50 ° C (120 ° F) when in function. 

Risk of fire

,

  explosion or 

burning.

 

If leakage and contact with liquid leaking from the battery, clean 
thoroughly with water and seek medical advice immediately. For safety 
reasons and to extend battery life, charging can be done in an ambient 
temperature range. 
Temperatures: Standard operation: 0 ° C (32 ° F) to +45 ° C (113 ° F) 
short-term storage: -20 ° C (-4 ° F) at 60 ° C (140 ° F) Storage long term -
20 ° C (-4 ° F) at 25 ° C (77 ° F). 

Do not check out, or do not attempt to remove the battery, 
which is not user replaceable. If battery problem, please 
contact Syride support. 

Notice to users regarding collection and 
disposal of batteries and electrical and 

electronic equipment. 

LITHIUM-ION BATTERY AND ELECTRONIC CIRCUIT IN THIS 
PRODUCT CAN NOT BE ADDED TO THE HOUSEHOLD WASTE. To 
allow proper recycling, please bring it to a collection point for. 
 
Directive 2002/96/EC applies within the European Union. For the 
procedure applicable in countries outside the European Union, please 
check with local authorities 

DO NOT ATTEMPT RECHARGING THE DEVICE WITH A DIFFERENT 
USB CORD THAN THE ONE PROVIDED. RATING : 5VDC 500mA. 

CE Mark 

This product meets the requirements of the CE mark as part of a 
residential, commercial or light industrial.  

 
About this document 

The greatest care was taken in the preparation of  this document. 
However, due to the commercial development of the product, some 
information may not be quite up to date. The information in this document 
is subject to change without notice. Syride not responsible for any 
omissions or technical or editorial errors in this manual, in the event of 
incidental or consequential damages resulting from the content or use of 
this document.

 

Summary of Contents for 13502




















Reviews: