Getting
Started
©
SYS TEC electronic GmbH 2007 L-1032e_9
17
Proper startup of the device is indicated by a (
refer to Figure 6
)
Welcome at SYSTEC CAN-Ethernet Gateway V2.3.0
/ >
message.
The device then waits for the input of commands. The startup message
portion "V2.3.0" represents the current version number and may vary.
Since the CAN-Ethernet Gateway is based on an internal file system,
there are commands for navigation. These commands are
(refer to
section 4.5)
:
ls
to show the contents of the current directory,
cd
to switch the current directory
write
to create a new file
rm
to delete a directory/file
sync
in order to store a file in non-volatile memory (EEPROM)
Predefined files are included for initial configuration. These are
located on the CD under
\Products\GW-003\SO-1027\RC-Files\UDP
(for the UDP transfer) or
\Products\GW-003\SO-1027\RC-Files\TCP
(for the TCP transfer).
Each folder contains a file for a server configuration
UDP_Server_1CAN.txt
or
TCP_Server_1CAN.txt
and a file for a
client configuration
UDP_Client_1CAN.txt
or
TCP_Client._1CANtxt
.
•
Copy these files into a folder of your choice on your PC (e.g.
C:\SYSTEC\GW-003\RC-Files
). Before you transfer one of these
files to the CAN-Ethernet Gateway you must modify the file. Open
the file
Udp_Server_1CAN.txt
with an editor.
•
Modify the local IP address, the subnet mask and the standard
Gateway address to the values that correspond to your application
requirements
(refer to section 4.5.12)
.
for example:
Summary of Contents for GW-003
