Introduction
©
SYS TEC electronic GmbH 2007 L-1032e_9
1
1
Introduction
1.1
Fundamentals
Internet communication via TCP/IP is finding ever-increasing
implementation in industrial applications. The CAN-Ethernet Gateway
from SYS TEC electronic GmbH is a solution that enables CAN
networks to be coupled together over the Internet/Ethernet, whereby
remote monitoring and control is possible. The CAN-Ethernet
Gateway controls networked communication and makes a transparent
CAN-based application interface available to the user.
The device supports a transparent, protocol-independent transfer of the
CAN messages, thus allowing its implementation into a wide range of
possible applications. Furthermore, the CAN-Ethernet Gateway can be
used with various higher layer CAN protocols (e.g. CANopen, SDS,
J1939, DeviceNet or other proprietary protocols).
The CAN-Ethernet Gateway can be used in CAN networks with a
transfer rate of up to 1 MBit/s corresponding to CAN Specification
2.0A (11-bit CAN identifier) and 2.0B (29-bit CAN identifier). For
each CAN message a time stamp can be created by the CAN-Ethernet
Gateway that is transferred along with the data.
The CAN-Ethernet Gateway can be configured via an asynchronous
serial interface (UART with RS-232 using hardware flow control) or
via a Telnet connection. The user can therefore adapt the functions of
the CAN-Ethernet Gateway to the specific application environment.
Summary of Contents for GW-003
