4. Press 6 to save and return to previous menu.
3-10. Call Button Selection [Setting code: 664246]
User can set whether to use the pagers as 1~6 or 7~12.
This feature is required when 2 sets of GP-206RT are used in the same place.
2. Press 6-6-4-2-4-6 to enter the transmission
button selection setting mode.
3. Press 1 to use them as 1~6 or 2 to use them as 7~12.
1. Press and hold 5 for about 10 seconds and
the device becomes input standby mode
(Press and hold until it makes “Beep~~” noise)
6
Save & exit
1
2
3
4
5
Button
Setting value
-
1~6
7~12
-
-
4. Press 6 to save and return to previous menu.
User can set the transmission output level from 1 to 5.
3-11. Transmission Output Setting [Setting code: 664251]
2. Press 6-6-4-2-5-1 to enter the transmission
output setting mode.
3. Press the applicable call button to set the output level.
1. Press and hold 5 for about 10 seconds and
the device becomes input standby mode
(Press and hold until it makes “Beep~~” noise)
6
Save & exit
1
2
3
4
5
Button
Setting value
Normal
Min
2
3
Max
- 10 -
1
2
3
4
5
6
6
2
4
4
6
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
5
4
6
6
1
2
3
4
5
6
