Syscall Nttworks SB-700 User Manual Download

Page: 5 / 20

3. Display

Charging the Battery

Home Screen Display

MICRO

U S B

Open the micro USB cover at the left side
of the pager.

Connect the USB cable to the power adaptor.

Insert the Micro-USB jack into the pager.

· Please use the device only with the power AC adapter (5V/1A) provided by manufacturer.
· If you use high-speed charger (9V), it causes the damage of charging circuit.
· It should be connected to a power source with AC110~240V.

Message Display

216

13:37

13:30 1/4C

· The pager goes to the sleep mode if not in use for 15sec
Tap button to wake it up.

· When message received, it will be displayed on the screen
with sound and/or vibration.

· You can check more than 2 messages depending on the
display type.

· You can check the battery level on the top right corner.
If there are received messages, tap button to check.

· The pager can be programmable through the bundled
software.

Unread

message

Time

Alarm

Battery

indicator

Unread

message

Message

received

time

Total

received call

Battery Life: Approx. 26Hours/ 20Hours (100-call)

· Tap

button to read a new message.

· The Bell ID can be created up to 10 digits using the
combination of alphanumeric, special characters and icons.

· The messages can be stored up to 20, and you can check
the number of unread messages

· Touch and hold

ㅁ

button for 1 sec to delete each message,

and tap > button once more to delete all messages.

Caution

-5-

Summary of Contents for Nttworks SB-700





















Search results

Summary of Contents for Nttworks SB-700

Reviews:

Related manuals for Nttworks SB-700

Brands by name

Popular brands

Syscall Nttworks SB-700, User Manual

Search results

Summary of Contents for Nttworks SB-700

Reviews:

Related manuals for Nttworks SB-700

Brands by name

Popular brands