background image

Safety

2.1  Designated use

PILOT 217 monitor/thin client is an HMI PC system. PILOT 217 monitor/

thin client is used to implement control and operating concepts and to

display and manipulate information in industrial and commercial envi-

ronments.

It is nonetheless possible for improper use to introduce hazards. For

correct operation and safe use it is therefore important to comply with

the information and instructions in this document.

Have the following work carried out only by professionals:

n

Installation

n

Deinstallation

n

Wiring

n

Implementing

Have the following work carried out only by Systec & Solutions

GmbH :

n

Repairs

n

Servicing

n

Maintenance

n

Modifications

The device may not be used in the following areas:

n

areas subject to explosion hazards

n

areas subjected to harmful radiation

n

areas and applications that are subject to vibration and impacts

n

for carrying out safety functions such as
– air traffic control / flight control systems
– monitoring / controlling nuclear reactions
– monitoring / controlling mass transportation facilities
– monitoring / controlling medical systems
– monitoring / controlling weapons systems

Contravening these instructions voids all warranties and manufac-

turer’s responsibilities.

2.2  Safety notices

Please read these instructions attentively right through. It constitutes a

part of the device it describes and must be held available at all times.
Use the device only in accordance with its designated use (see

Ä

 Chapter 2.1 “Designated use” on page 7

).

For your own safety, always comply with the following safety instruc-

tions.

Warnings signal safety-related information.

Safety

Safety notices

PILOT 217 monitor/thin client - Industrial monitor/thin client

 

 7

Summary of Contents for PILOT 217










































Reviews: