699-41-20.1
-
37 -
6.8.3
Lubrication carriage axis type LS_
Fig. 28 Lubrication carriage
In the carriage (2) are two greasing nipples (1), where the runner blocks
can be filled with a grease gun.
Lubricant
Lubricant based on DIN 51825 (see Chap. 6.6).
Lubrication interval
The required regreasing intervals depend on environmental conditions,
the standardrecommendation is once per 1.000 km. To ensure the func-
tion of the seal, a cleaning hub over the entire travel range should be
performed after a maximum of 8 hours.
Lubricant quantities
Axis type LSZ_ Lubricant quantities [ml]
LSZ60
0,4
LSZE60
0,4
6.8.4
Lubrication Axis type KR
Fig. 29 Linear axis KR