699-41-20.1
-
9 -
2.2
Warning and safety information
Before installing and putting the DriveSets into service, please pay atten-
tion to the following warning and safety information. By doing so, you
will avoid possible defects and malfunctions resulting from improper
handling.
Danger of crushing! Shock hazard!
Depending on the specification of DriveSets in speed and load you hurt
yourself serious if an accidentally switch-on occurres during the work.
Carry out all assembly and installation work on DriveSets only when the
equipment is completely free of any electrical current.
Before starting the work, make sure that the connection plugs for the
power supply of all the power supplies to your application have been
unplugged.
Danger from flying away of parts!
Ensure that no tools or other materials are lying in the trajectory area or
on the axes.
Malfunctions or even destruction of the Xemo controller or the con-
nected components.
Do not plug or unplug cable connections within the DriveSets when the
attached supply voltage is connected or turned on.
When re-plugging cables, ensure that they are re-plugged according to
the proper allocation of the cables on the device’s connector assembly.
Endangering of the high dimensional stability of the axis!
Do not apply higher forces during mechanical work.
In case damages result from incorrect installation, no claims to free-of-
charge repairs exist, even if the warranty period is still in effect.
