4
Intended application
The mobile jet-system Tornado ACS operates with the worldwide patented negative pres-
sure jet principle and consists of only one compact mobile machine. By the use of suitable
blasting media (granulate) of different grain and structure it facilitates a radiation with re-
trieval of the jet grain being dust-free and low in noise.
The machine contains a generator for negative pressure with a filter cartridge and dust
separation as well as an appropriate container for the blast material. Further components
of the system are the lighted jet cap and the jet lance.
The fields of
applications
are various and are selected by different criteria like:
Subsoil
clinker, concrete, sandstone, wood, plastic, metal, tiles,
facades
Removal
strong or in layers
Contamination
graffiti, rust, lime stone, saltpetre, weathering etc.
Possible applications: Industrial cleaning, craft of painting or lacquering, housing coopera-
tive, repair and maintenance of cars, the building industry. The Tornado ACS is used for
cleaning, removal of layers and lacquer, de-rusting, roughening up and restoring of surfac-
es. The use of the system is possible in interiors, but also on hydraulic platforms or scaf-
folds without special preparation. Therefore a sufficient stability of the system has to be
considered!
The application is not admissible in rooms or environments being endan-
gered of explosion. There is no permission for using the system to clean an-
imals or persons.
The compliance with conditions given by the manufacturer on maintenance, operation and
repairing is part of the correct use. Due to improper application the liability will be exclud-
ed. The regulations on preventing accidents and any further generally known security
technology according to occupational health supervision must be observed. The manufac-
turer’s liability is also excluded for damages which are the result of unauthorized changes
on the system. The user is responsible for third persons in the work area. If the equipment
is not ready for work, it may not be used. It is essential to make oneself familiar with all
mechanisms and controls as well as with their function before start up. The equipment is
never to be left unsupervised, as long as the suction device is running. In order to prevent
an unauthorized use of the equipment, the power supply plug has to be taken off.
Taking charge of the machine
The machine has to be checked on completeness and possible damages caused by
transport immediately after its arrival. Such damages are replaced when a confirmation of
the forwarding agent and the freight papers are send to systeco GmbH.
