8
Emptying of used blast media
1.
Operate until blasting media is completely transported into container above the flap
2.
Separate media tower below the flap
3.
Suck blasting media of the bottom container with the suction hose until it is
completely empty
4.
Remove upper container of the media tower
5.
Place the funnel of the lower container into granulate bucket
6.
Set the middle container with flap onto the funnel
7.
Open flap and fill back the granulate into the bucket
8.
Reassemble media tower
Special advices:
When changing the blasting media the whole system has to be cleaned completely of the
jet material used so far, otherwise damages on sensitive surfaces could occur. The clean-
ing is necessary for all suction hoses, jet hood and
–lance as well as containers and dos-
ing equipment.
Keep blasting media always dry and in a closed box. Remove possibly escaped
blast media of the floor (sweep or suck up).
Please consider local conditions for the disposal of colour residues or granulate material.
Cleaning video TORNADO ACS
