2
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings
: Serious injury may be caused if warnings are neglected.
Cautions
: Injury or equipment damage may be caused if cautions are neglected.
Warnings
1. This product must only be used in strict compliance with UK electrical standards and
safety regulations.
2. Input voltage must be applied according to specification and meet the IEC60950 1
standard. This camera uses 12vDV and must be connected to a 12vDC regulated power
supply.
3. It is recommended to use a separate power supply for each camera and to avoid
overload that the power supply is adequately rated to cover current rating of camera plus
30% head room to ensure overheating is not caused which can create a fire hazard.
4. Always make sure that power plugs are firmly inserted into power sockets.
5. When the product is installed on a wall or ceiling, the device must be firmly fixed.
6. If smoke, odour or noise is emitted from the device, turn off the power at once and
unplug the power cable.
7. If the product fails to work properly, please contact your installer and never attempt to
disassemble the camera yourself. (We cannot assume any responsibility for problems
caused by unauthorised repair or maintenance.)
