INSTALLATION
The cooker hood is intended for free-hang-
ing installation. The cooker hood has a mo-
torised damper, LED lamps and metal mesh
filter. Installation, use, care, maintenance
etc., are described in these instructions.
TECHNICAL INFORMATION
Fig. 1
Width
60 and 90 cm
Other
measurements
see Fig. 1
Electrical
installation
230 V~ earthed.
Max. connection
output for control
cable
900 W at 230 V
Lighting
LED 4 x 2 W
INSTALLATION
Fixing parts, screws for mounting, etc. are
supplied with the cooker hood.
Electrical installation
The cooker hood is supplied with an electri-
cal cable and earthed plug for connection
to an earthed wall socket as well as a con-
trol cable for connection to an external
unit.
When installing with an extended upper
chimney part, take this into account when
positioning sockets.
The junction box and wall socket must be
accessible after installation is complete.
Replacement of damper hatch
N.B.
Only applicable where basic ventilation
takes place via the cooker hood.
The cooker hood is fitted with a sealed
damper. If the cooker hood is used in a kit-
chen that does not have separate basic
flow ventilation, it must be fitted with an ad-
justment hatch for basic flow. Replace the
damper hatch before installing the cooker
hood, see separate instructions
Installation Components
A 1st
Drill template
B 1st
Frame
C 4st
Screws 6×75
D 4st
Plugs Ø 10 x 60
E 4st
Screws 3.5×4.5
F 4st
Screws M6 x 8.8
H 1st
Screw 4.2×32
22
991.0433.866/126185/2016-02-08