background image

12/46 | 

FDR-3G…OF

Ordering Code

DN - Nominal Dimension, øDN

 from 200 mm up to 630 mm

B - Type of Activation (H0-OF up to GSD24T-OF)

H0-OF

  (Manual crank, no switches)

H2-OF

  (Manual crank, 2 switches 230V AC or 24V AC/DC)

H5-2-OF

  (Manual crank, 24V AC/DC electromagnet, 2 switches 230V AC or 24V AC/DC)

H6-2-OF

  (Manual crank, 230V AC electromagnet, 2 switches 230V AC or 24V AC/DC)

B230T-OF

  (230V AC Belimo Actuator)

G230T-OF

  (230V AC Gruner Actuator)

B24T-OF

  (24V AC/DC Belimo Actuator)

G24T-OF

  (24V AC/DC Gruner Actuator)

BSD230T-OF

  (230 V AC Supply unit & Smoke detector 24 V AC/DC & 24 V AC/DC Belimo Actuator)

GSD230T-OF

  (230 V AC Supply unit & Smoke detector 24 V AC/DC & 24 V AC/DC Gruner Actuator)

BSD24T-OF

  (Smoke detector 24 V AC/DC & 24 V AC/DC Belimo Actuator)

GSD24T-OF

  (Smoke detector 24 V AC/DC & 24 V AC/DC Gruner Actuator)

Example of the Circular Overflow Fire Dampers Ordering Code

FDR-3G-630-H2-OF

Circular overflow fire damper, nominal diameter 630 mm, manually operated activation mechanism with open and 
closed position indication with switches AC 230 V or AC/DC 24 V. 
Note: The fire resistivity depends on the installation method.

Inspection opening positions (Removable mechanism is available for all sizes):
ø 200 ≤ DN ≤ ø225
Standardardly in position: L;  Additional inspection opening cannot be added.

Summary of Contents for A-FDR-3G-OF















































Reviews: