Owner’s Manual
3
Unit Inspection
Inspected For Freight Damages
Your air handling unit was carefully packed for shipping. This means
that the packaged product, with normal handling, will withstand the
load conditions encountered in normal transit and in handling.
Your air handling unit should be inspected at the time of delivery to
determine if any damage is present due to shipping or handling. If
any damage is discovered, do not install the unit. Notify the freight
company immediately and file a damage claim. The receiver is
responsible for identifying damage and making a claim. If a partial
claim is made Change’Air will assist you in determining replacement
cost for any damaged parts.
The manufacturer can bear no responsibility for damages that occur
in transit, or for improper operation of the unit as a result of shipping
damages.
Identification
Please keep this page for future reference
You have just purchased a
Change’Air
Freshman Series
Dehumidification Air Handling Unit. This design is certified by the
Canadian Standards Association
(CSA)
and bears the label
indicating it has been tested to the current safety standards for both
the United States and Canada.
To simplify the proper installation and to assure that the unit will
operate in conformity with generally accepted safety regulations, the
manufacturer and testing agency require that Installation should be
carried out by a qualified HVAC technician using industry accepted
standard practices. If questions arise during installation contact
Change'Air Technical Services for assistance before proceeding.
NOTE
: Do not deviate from the instructions as outlined in this
manual. Failure to follow the installation, operation and maintenance
instructions will
void
the responsibility of
Change’Air Products and
Services, Ltd.
REFERENCE INFORMATION
For future reference, you should record the following information from the units
Dealer Name: ________________________________
Address: ________________________________
City: ________________________________
State (Province): ________________________________
Zip or Postal Code:________________________________
Country: _______________________________
Model Number(s)_________________________________
_________________________________________________
Serial Number(s) _________________________________
_________________________________________________
Date of Purchase_________________________________
Date of Installation________________________________
Safety Labeling
Safety Labeling and Signal Words
Danger
Warning
Caution
Notice
The signal words
DANGER
,
WARNING
and
CAUTION
are used to identify levels of seriousness.
The signal word
DANGER
is used on product labels to signify an immediate hazard.
The signal words
WARNING
and
CAUTION
will be used on product labels and throughout this manual and other manuals that may apply.
WARNING
WARNING
Hazards or unsafe practices which
COULD
result in
severe personal
injury or death.
WARNING
Rotating blades could
cause severe injury.
Keep hands clear.
Lockout power and
allow machine to stop
before servicing.
DANGER
Hazardous voltage.
Disconnect all power before
working on this equipment.
Failure to observe this
instruction may result in
death or serious injury.
DANGER
Immediate hazards which
WILL
result
in
severe personal injury or death.
DANGER
CAUTION
Burn hazard.
Do not touch.
To avoid possible skin
burns disconnect and
lockout power and allow
to cool before servicing.
CAUTION
Hazards or unsafe practices which
COULD
result in
minor personal
injury or product or property
damage.
CAUTION
