18
ERV core washing instructions
For proper maintenance of your energy recovery core please follow these instructions
5
6
3
4
1
Remove both filters by sliding them out.
2
Remove the core from the unit.
3
With one of your core's air inlets facing
down, place it in a large sink, bathtub, or
shower.
4
Pour clean tap water through the face of the
core facing upwards until it runs clear.
Ensure the entire surface is rinsed.
5
Rotate the core so that its other air inlet is
facing down and repeat step 5.
6
With plates still oriented vertically allow the
core to dry, normally 2-3 hours.
7
Slide back the core into the unit
8
Replace both filters.
1
2
7
8
