background image

1

General notes

1.1

Structure of the operating instructions

Before installation and start-up, read this manual carefully to ensure correct use!
We emphasize that these operating instructions apply to speci

c units only, and are in no way 

valid for the complete system!

Use these operating instructions to work safely with and on the device. They contain safety instruc-
tions that must be complied with as well as information that is required for failure-free operation of the 
device.
Keep these operating instructions together with the device. It must be ensured that all persons that 
are to work on the device can refer to the operating instructions at any time.
Keep the operating instructions for continued use. They must be passed-on to all successive owners, 
users and 

nal customers.

1.2

Target group

The operating instructions address persons entrusted with planning, installation, commissioning and 
maintenance and servicing and who have the corresponding quali

cations and skills for their job.

1.3

Exclusion of liability

Concurrence between the contents of these operating instructions and the described hardware and 
software in the device has been examined. It is still possible that non-compliances exist; no guarantee 
is assumed for complete conformity. To allow for future developments, construction methods and 
technical data given are subject to alteration. We do not accept any liability for possible errors or 
omissions in the information contained in data, illustrations or drawings provided. 
We accept no liability for damage caused by misuse, incorrect use, improper use or as a consequence 
of unauthorized repairs or modi

cations.

1.4

Copyright

These operating instructions contain copyright protected information. The operating instructions may 
be neither completely nor partially photocopied, reproduced, translated or put on data medium without 
previous explicit consent. Infringements are liable for damages. All rights reserved, including those 
that arise through patent issue or registration on a utility model. 

2

Safety instructions

This chapter contains instructions to prevent personal injury and property damage. These instructions 
do not lay claim to completeness. In case of questions and problems, please consult our company 
technicians. 

2.1

Intended use

The equipment is to be used solely for the purposes speci

ed and con

rmed in the order. Other uses 

which do not coincide with, or which exceed those speci

ed will be deemed unauthorised unless 

contractually agreed. Damages resulting from such unauthorised uses will not be the liability of the 
manufacturer. The user will assume sole liability.
Reading these operating instructions and complying with all contained instructions - especially the 
safety noti

cations contained therein - are considered part of intended use. To consider is also the 

manual of attached components. Not the manufacturer, rather the operator of the device is liable for 
any personal harm or material damage arising from non-intended use!

2.2

Explanations of symbols 

Safety instructions are highlighted with warning triangles and are depicted according to the degree of 
hazard as follows.

Attention!

General hazardous area. Death or severe injury or signi

cant property damage can occur if the 

corresponding precautions are not taken!

Operating Instructions 

FRQ5S-E-6/10A

General notes

L-BAL-E247-GB 1512 Index 001

Part.-No. 00163444-42

4/17

Summary of Contents for FRQ5S-E-10A


















Reviews: