14
8
Accessories
Note:
For details of the accessories, please check our online catalog or contact Systemair.
Table 4 Accessories
1
2
3
4
6
5
7
3
1
PRF, PRF EX
Fan
5
VKA-P
Adjust. damper
2
VP
Splinter protection
6
WSD
Weather roof KIT
3
ASS-P
Flexible connection
7
SD
Vibration damper
4
VKS-P
Gravity shutter
9
Installation
9.1
Safety information
Warning: Danger from falling fan or fan parts.
♦
Check the surface before installation for load bearing capacity.
♦
Consider all static and dynamic loads when selecting hoisting equipment and fastening components.
General safety information
♦
Fans installed in areas where personnel access regularly must be equipped with a splinter guard, please contact
Systemair.
♦
Installation may only be carried out by adequately qualified persons, details see Table 1
♦
Wear protective equipment during all work in the vicinity of the fan, details see 3.2
♦
Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.
♦
Do not dismantle or circumvent safety elements, or put them out of function.
♦
Move the rotor of the fan by hand before you install it in order to check that it moves freely.
♦
Provide contact and intake protection and ensure safety distances according to DIN EN ISO13857 and DIN 24167-1.
♦
Prevent the possibility of foreign bodies being drawn in.
♦
To reduce transmission of vibration to the duct system, we recommend flexible connections from our accessory
range, see chapter Accessories.
♦
The materials the fan is made of have to be compatibel to the transported media.
♦
Pay attention to the safety data sheet of the chemical substances transported with the fan.
| 002
