Page 22
6.2 Display
The display is an LCD 8 lines x 22 columns. The quan-
tities and the information about the operation of the
unit are alternated in the form of subsequent screens,
named.
6.3 Keyboard
Arrows key - Up/Down/Enter
If the cursor is in the top left-hand corner (Home),
press the UP/DOWN keys to access the subsequent
masks associated to the selected branch. If a mask
includes some value setting fields and you press the
ENTER key, the cursor will reach these fields.
Once you have reached the quantity setting field, you
can modify any value (within the expected limits) by
pressing the UP/DOWN keys.
After you have selected the desired value, press the
ENTER key again to store it.
Control
Access to the “display mask” of the machine
status.
Esc key
:
allows you to move from one mask to
another.
Alarm key
: used to display the alarms, to re-
set them in manual.
Press it one to display the mask of the activa-
ted alarm, press it again to reset the alarm
signal.
Prg-Esc keys
: Pressing these keys at
the same time,allows you to turn the
unit on/off.
Up-Down keys
: allows you to set the
control parameters’ values and to mo-
ve from one mask to another (not bac-
klighted).
Enter key
: used to move the cursor inside the
masks and to save the values of the set para-
meters.
Alarm-Enter keys
: Press these keys
at the same time to enter the “storical
alarm“after 1’ come back at status ma-
chine menu’.
