SYSTEMS Poweramp PowerHold Owner & User Manual Download

Page: 6 / 52

4111-0016 — Aug. 2019

1.50"

3.00"

Decal Size: 1.5 x 3

File Name: 1751-0736 Rev A

Arc Flash and

Shock Hazard

PPE [Personal Protection

Equipment] Required

De-energize equipment before

working on or inside. Do not

open cover without appropriate

PPE. Refer to NFPA 70E for

PPE requirements. This panel

may contain more than one

power source.

Hazardous Voltage

Will Result in Death

or Serious Injury

1751-0736 Rev A

1.50"

3.00"

Control Box Size: Overlay
Decal Size: 1.5 x 3
File Name: 1751-0857 Rev A

Lockout/Tagout

power before

servicing.

Comply with

OSHA 1910.147

1751-0857 Rev A

1.28"

2.43"

Control Box Size:
Decal Size: 2.75 x 1.25
File Name: 1751-0735

PROUDLY

MADE

USA

SYSTEMS, INC.

GERMANTOWN, WI

MALVERN, AR

1751-0735

File Name: 1751-0330 REV C

Decal Size: 5.375 x 1.75

FORK

HERE

1751-0330 Rev C

File Name: 1751-0330 REV C

Decal Size: 5.375 x 1.75

FORK

HERE

1751-0330 Rev C

1751-0330

1751-0726 Rev B

File Name: 1751-0726 Rev B

Decal Size: 5.92 x 2.36

CRUSH HAZARD

DO NOT ENTER PIT unless dock leveler is

securely supported by maintenance prop. Place

barriers on driveway and dock floor to indicate

service work being performed. Failure to comply

will result in death or serious injury. Refer to

owner‘s/user‘s manual for proper maintenance

procedures.

1751-0726

File Name: 1751-0329 Rev A

Decal Size: 13 x 2

DO NOT

FORK THIS SIDE

1751-0329 Rev A

File Name: 1751-0329 Rev A

Decal Size: 13 x 2

DO NOT

FORK THIS SIDE

1751-0329 Rev A

1751-0329

Unsupported dock leveler

ramps can lower unexpectedly.

Before allowing vehicle to leave

the dock always:

•

Ensure no equipment,

material or people are on

dock leveler.

Return dock leveler to its

stored position at dock level.

Failure to follow posted instructions will result in death or serious injury.

Call 262.255.1510 for replacement placards, warning labels, or owner’s/user’s manuals.

File Name: 1751-0730 Rev B
Decal Size: 9.12 x 3.25

MAINTENANCE/SERVICE

7. Stay clear of hinges and front and

sides of moving dock leveler.

8. N e v e r u s e d a m a g e d o r

malfunctioning dock leveler. Report

problems immediately to supervisor.

1. Read and follow all instructions,

w a r n i n g s a n d m a i n t e n a n c e

schedules in the owner‘s/user‘s

manual.

2. Maintenance/Service of dock leveler

restricted to trained personnel.

3. Place barriers on the driveway and

dock floor to indicate service work is

being performed.

4. DO NOT ENTER PIT unless dock

leveler is securely supported by

maintenance prop.

5. If electrically powered turn off and use

OSHA lockout/tagout procedures.

OPERATION

1. Read and follow all instructions and

warnings in owner’s/user’s manual.

2. Use of dock leveler restricted to

trained operators

3. Always chock trailer wheels or

engage truck restraint before

operating dock leveler or beginning to

load or unload.

4. Never use hands or equipment to

move ramp or lip

5. Before activating dock leveler:

Ensure trailer is backed in against

bumpers.

Remove any end loads if required.

Check trailer alignment to avoid lip

interference. If lip does not lower to

trailer bed, reposition vehicle.

6. Ensure truck bed supports extended

lip or leveler frame supports the ramp

before driving on ramp.

•

1751-0730 Rev B

Unsupported dock leveler

ramps can lower unexpectedly.

Before allowing vehicle to leave

the dock always:

•

Ensure no equipment,

material or people are on

dock leveler.

Return dock leveler to its

stored position at dock level.

Failure to follow posted instructions will result in death or serious injury.

Call 262.255.1510 for replacement placards, warning labels, or owner’s/user’s manuals.

File Name: 1751-0730 Rev B
Decal Size: 9.12 x 3.25

MAINTENANCE/SERVICE

7. Stay clear of hinges and front and

sides of moving dock leveler.

8. N e v e r u s e d a m a g e d o r

malfunctioning dock leveler. Report

problems immediately to supervisor.

1. Read and follow all instructions,

w a r n i n g s a n d m a i n t e n a n c e

schedules in the owner‘s/user‘s

manual.

2. Maintenance/Service of dock leveler

restricted to trained personnel.

3. Place barriers on the driveway and

dock floor to indicate service work is

being performed.

4. DO NOT ENTER PIT unless dock

leveler is securely supported by

maintenance prop.

5. If electrically powered turn off and use

OSHA lockout/tagout procedures.

OPERATION

1. Read and follow all instructions and

warnings in owner’s/user’s manual.

2. Use of dock leveler restricted to

trained operators

3. Always chock trailer wheels or

engage truck restraint before

operating dock leveler or beginning to

load or unload.

4. Never use hands or equipment to

move ramp or lip

5. Before activating dock leveler:

Ensure trailer is backed in against

bumpers.

Remove any end loads if required.

Check trailer alignment to avoid lip

interference. If lip does not lower to

trailer bed, reposition vehicle.

6. Ensure truck bed supports extended

lip or leveler frame supports the ramp

before driving on ramp.

•

1751-0730 Rev B

1751-0730

Decal Size: 8.72 x 1.02

Material: Ritrama 3-1190 (3.5 mil thick) calendered vinyl

02 hi-tack permanent acrylic adhesive

Ritrama 3-7146 (1.0 mil thick) clear polyester laminate

File Name: 1751-0729 Rev A

CRUSH HAZARD

Do not work under dock leveler unless this maintenance prop has been secured in the

upright position. Failure to comply will result in death or serious injury. See owner’s/user’s

manual for proper procedures

1751-0729 Rev A

1751-0729

Left Platform Side

Right Platform Side

1751-0640

1751-0138

File Name: 1751-0727 Rev B

Decal Size: 5.06 x 2.40

CRUSH HAZARD

Maintenance prop must

support leveler behind bar.

Do not force maintenance

prop forward of bar to

support lip. Refer to

owner’s/user’s manual for

proper use. Failure to

comply will result in

death or serious injury.

1751-0727 Rev B

2.40"

5.05"

Decal Size: 5.05 x 2.40

File Name: 1751-0731 Rev A

CRUSH HAZARD

Open the pin latch and insert

through the maintenance

prop housing and prop

completely. Close the pin latch

to secure prop. Use every

time dock leveler is serviced.

Failure to comply will result

in death or serious injury.

1751-0731 Rev A

1751-0731

Right Platform Side

www

.com

DockSystemsInc

1.800.643.5424

Decal Size: 6 x 2
File Name: 1751.0651

1751-0651

Decal Placement

for H Series

1751-0727

Serial Tag

File Name: 1751-0138 Rev B

Decal Size: 4 x 2

CRUSH HAZARD

DO NOT REMOVE

hydraulic cylinder until leveler is

safely supported by maintenance prop. Refer to

owner’s/user’s manual for proper maintenance

procedure. Failure to comply will result in death or

serious injury.

1751-0138 Rev B

www

.DockSystemsInc.com

1.800.643.5424

HP SERIES

Decal Size: 6 x 2.4
File Name: 1751.0640

www

.com

DockSystemsInc

1.800.643.5424

Decal Size: 6 x 2
File Name: 1751.0651

Two positions one on top of each fork pocket.

Figure 2

Note:

This is a example of dock leveler safety decals. See specific model manual for correct safety decal

sheet, or consult Systems, LLC Tech Services.

Safety Decals

PRECAUTIONS

Summary of Contents for Poweramp PowerHold





















































Search results

Summary of Contents for Poweramp PowerHold

Reviews:

Related manuals for Poweramp PowerHold

Brands by name

Popular brands

SYSTEMS Poweramp PowerHold, Owner & User Manual

Search results

Summary of Contents for Poweramp PowerHold

Reviews:

Related manuals for Poweramp PowerHold

Brands by name

Popular brands