AFTER YOU SPRAY
1. Rinse the tank with water to remove any traces of the
solution that was applied.
2. Run water through the sprayer, hose and spray wand tool
for 1-3 minutes to flush out any residual solution from the
plumbing. Always dispose of rinse solution in accordance
with local regulations.
3. With the sprayer turned off, drain the hose and spray
wand of any excess water.
4. Air dry the tank (remove the filter and tank cap).
5. Clean the nozzle.
6. Store the sprayer in a clean location away from extreme
heat or frost. For extended periods of time, recharge and
discharge the battery every 2 weeks to maximize battery
life.
