Memory mode and memory structure
S4600-ST®
39
Before you use a MicroSD card for the first time, you should
create the folder structure.
The function "Create Memory" creates 10 folders with 10 files each
on the MicroSD card; this represents the memory structure of S4600-
ST
®
. The function takes a few seconds to finish.
Note:
This function deletes a memory structure that may already be
available on the card. However, private user data (such as pictures,
documents, etc.) are not deleted by this function.
The memory structure of S4600-ST
®
consists of 100 memory
blocks; one measurement log can be written to each of these
blocks.
At the end of a measurement, the measurement log can be saved to
a free memory block. A total of 10 x 10 memory blocks are available.
The file name is automatically generated by the device according to
the following structure:
Type of measurement (e.g. pressure measurement) date
(day.month.year) and time
Note:
A file which has been created and saved on the card is protected
against manipulation and, if manipulated, can neither be displayed
by the device nor printed!
Pressu 26.02.12-08:41