3
FOR YOUR SAFETY
1 Before using the appliance for the first time, remove any labels or protections from the iron’s
plate.
2 Check that the voltage indicated on the data plate corresponds with that of the local network
before connecting the appliance to the supply mains.
3 Always connect the appliance to a grounded outlet.
4 Never leave the appliance unattended while it is connected to the supply mains.
5 Never leave the appliance within child’s reach.
6 If you leave the appliance unattended, even momentarily, always remove the plug from the wall
socket and place the iron on the provided “iron stand” (8).
7 Do not leave the hot iron on the connection cable or power cord.
8 Do not fill the boiler tank with vinegar or other anti-limestone agents.
9 Always use the provided measure (13) to fill the boiler.
10 Do not immerse the appliance in water or other liquids.
11 The iron must be used and rested on a stable surface.
12 When placing the iron on its stand, ensure that the surface on which the stand is placed is
stable.
13 The iron is not used if it has been dropped, if there are visible signs of damage or if it is
leaking.
14 The plug must be removed from the socket-outlet before the water reservoir is filled with
water.
15 The filling aperture must not be opened during use.
16 Water may leak from the iron’s plate if the steam button is pressed before the boiler has
reached the optimal temperature (after about 8 minutes) or before the appliance is hot.
17 The appliance is not intended for use by young children or infirm persons unless they have
been adequately supervised by a responsible person to ensure that they can use the appliance
safely. Young children should be supervised to ensure they do not play with the appliance.
18 ATTENTION!
Before unscrewing cap (7), carry out the following operations:
1) Always turn off the boiler by pressing button (4);
2) press the steam button (10) as to let out all the residual steam;
3) Turn off the iron by pressing button (5)
4) remove the plug from the wall socket;
5) Let the iron cool down for a few minutes;
6) Slowly unscrew the cap (7) and wait for the hissing noise of the steam to stop before
unscrewing it completely.
19 Never use the iron if it is damaged. Any repair work, including the replacement of the power
cord and temperature regulators, must only be carried out by an authorized Technical Assistance
Center or by a person with a similar qualification -as a special tool is required - in order to avoid
any risks.
20 Only replace the boiler cap containing the safety device (calibrated) with another original
spare part.
21 We do not assume the responsibility for any damage caused by the incorrect use of the
appliance or for uses other than those described in this booklet.
Summary of Contents for Easy Life SY-EP22
Page 1: ......
